One Shaft Magnetic Powder Brake Rated Torque 400NM Max Current 4A
Magnetic Powder Brake True Engin
One Shaft Magnetic Powder Brake Rated Torque 400NM Max Current 4A
Features of magnetic powder brake
The transmission torque has a linear relationship with the
magnetizing current. The size of the torque can get controlled
within large range. Under normal circumstance, the magnetizing
current has a linear relationship with transitive torque within
range of 5%-100% rated torque.
The friction part will generate heat inevitably or even destroyed
when it keep continuous sliding. But this device has a complete
cooling set, it will not generate a lot of heat after long time
running and it has a long service life.
Application of magnetic powder brake
Due to the features of the magnetic powder clutch and brake, they
have been widely used in paper making, printing, plastic items,
rubber industry, textile industry, printing and dyeing,wire and
cable, metallurgy industry and tension control of winding and
winding in roll material processing industry.
About life of magnetic powder brake
The use of magnetic powder clutch/brake life lies in the life of
the magnetic powder.In general, magnetic powder in the condition of
not overloaded, its service life is 4500~7500 hours;But in some
condition it can prolong service life many times, such as: reduce
the magnetic powder clutch/brake torque, relative sliding speed and
slip power to the rating of 50% 70%.That is to say, when the
design, allowance enlarge some as much as possible.
About the torque of magnetic powder brake
Magnetic powder clutch/brake factory after use, the magnetic powder
in the early stages of using break-in happens, torque will be
slightly down, can be adjusted by electric current to compensate.
| Item | Torque | Voltage | Speed | Max current | D1 | D2 | D3 |
| TZ6A-1 | 6 | 24 | 1400 | 0.8 | 130 | 62 | 44 |
| TZ12A-1 | 12 | 24 | 1400 | 1 | 157 | 62 | 50 |
| TZ25A-1 | 25 | 24 | 1400 | 1.5 | 182 | 78 | 58 |
| TZ50A-1 | 50 | 24 | 1400 | 1.8 | 219 | 100 | 75 |
| TZ100A-1 | 100 | 24 | 1000 | 2 | 290 | 120 | 90 |
| TZ200A-1 | 200 | 24 | 1000 | 3 | 335 | 140 | 110 |
| TZ400A-1 | 400 | 24 | 1000 | 4 | 398 | 200 | 130
|
| L1 | L2 | L3 | L4 | 6-S | d | t | R-diammeter | Deepth | Net weight |
| 25 | 10 | 67 | 107 | M5 | 12 | 4 | M4 | 8 | 3 |
| 30 | 15 | 84 | 133 | M5 | 16 | 5 | M4 | 8 | 5 |
| 40 | 19 | 91 | 154 | M6 | 20 | 6 | M5 | 10 | 7.5 |
| 50 | 22 | 110 | 185 | M6 | 25 | 8 | M6 | 12 | 13 |
| 65 | 25 | 143 | 238 | M8 | 30 | 8 | M10 | 20 | 28 |
| 70 | 30 | 170 | 275 | M10 | 35 | 10 | M10 | 20 | 47 |
| 99 | 35 | 199 | 338 | M12 | 45 | 14 | M10 | 20 | 73 |
FAQ
1. How to place an order?
Please provide us more details of what you want, such as:
application, measurement range, output, accuracy, thread type,
electric connector and other related parameters.
2. Does SNC offer any discount?
Yes, if you buy large QTY, please contact us, we will give you a
big discount.
3. What terms of payment are available?
We accept T/T, L/C, Trade assurance, Western Union, Paypal, etc.
4.When will you arrange the production?
We will arrange the production immediately after receiving your
payment.
5. How do you ensure good product quality?
We have a complete quality control system, all of our products are
fully checked by IQC, OQC departments before shipping to our
clients
6. Do you have warranty ?
Yes, we provide 2 years warranty for most of our products.
