Magnetic Eddy Current Brake 400NM Torque With 2600 W Slip Power
Powder Brake Hollow Flange
Hollow Coupling Eddy Current Brake 400NM Slip Power 2600W
Alternative Mitsubishi
Features:
1. Rated torque: 6 to 400 (N · m)
2. Natural cooling / compulsory extended shaft type
a. 15 r / min from available
b. through the compressed air is blown into the voids in the heat
to improve the thermal capacity.
About life of magnetic powder brake
The use of magnetic powder clutch/brake life lies in the life of
the magnetic powder.In general, magnetic powder in the condition of
not overloaded, its service life is 4500~7500 hours;But in some
condition it can prolong service life many times, such as: reduce
the magnetic powder clutch/brake torque, relative sliding speed and
slip power to the rating of 50% 70%.That is to say, when the
design, allowance enlarge some as much as possible.
About the torque of magnetic powder brake
Magnetic powder clutch/brake factory after use, the magnetic powder
in the early stages of using break-in happens, torque will be
slightly down, can be adjusted by electric current to compensate.
Remarks:
(1): The formal installation method (high-speed rotating side as
the input side) to use magnetic powder clutch.
(2): Please note that the moisture. Magnetic particle moisture, the
performance will become unstable, so be especially careful not to
let the oil or moisture intrusion internal.
(3): Please note that the surface temperature.
| Model | Torque NM | Voltage
V | Current
A | Speed
rpm/min | Slip power
w |
|
| ZA-0.6Y | 6 | 24 | 0.3 | 1800 | 130 |
| ZA-1.2Y | 12 | 24 | 0.39 | 1800 | 320 |
| ZA-2.5Y | 25 | 24 | 0.73 | 1800 | 450 |
| ZA-5Y | 50 | 24 | 0.94 | 1800 | 700 |
| ZA-10Y | 100 | 24 | 1.21 | 1800 | 900 |
| ZA-20Y | 200 | 24 | 1.9 | 1000 | 1900 |
| ZA-40Y | 400 | 24 | 2.2 | 1000 | 2600 |
| Model | Outline dimention | Hollow shaft size | Center ring installing size |
| D | L | d(H7) | b(F8) | L1 | L2 | D1(g7) | D2 | n-dX1 dep |
| ZA-0.6Y | 128 | 68 | 12 | 4 | 4 | 2 | 70 | 80 | 3-M5*10 |
| ZA-1.2Y | 160 | 88 | 18 | 5 | 2 | 5 | 74 | 100 | 3-M6*10 |
| ZA-2.5Y | 180 | 98 | 20 | 5 | 5 | 5 | 100 | 140 | 3-M10*19 |
| ZA-5Y | 220 | 115 | 30 | 7 | 5 | 5 | 110 | 150 | 3-M10*19 |
| ZA-10Y | 275 | 136 | 35 | 10 | 6 | 5 | 110 | 150 | 6-M10*22 |
| ZA-20Y | 335 | 160 | 45 | 12 | 8 | 6 | 160 | 240 | 3-M5*30 |
| ZA-40Y | 360 | 210 | 50 | 12 | 8 | 6 | 160 | 240 | 3-M5*30 |
Remarks:
(1): The formal installation method (high-speed rotating side as
the input side) to use magnetic powder clutch.
(2): Please note that the moisture. Magnetic particle moisture, the
performance will become unstable, so be especially careful not to
let the oil or moisture intrusion internal.
(3): Please note that the surface temperature.
FAQ
How to get your suitable machine parts
Enquiry: Contact us by email, phone call, fax, Instant Messenger
(Skype) and let us know your enquiry.
Discussion:Let us know the model number,like magnetic powder
clutch, specify the items you desire, confirm specification;
OEM/ODM consultation.
Place order as per contract or discussion.
Perform invoice( sales contract ) In duplicate confirmed and kept
by both sides.
Payment settled.
Order completed under our arrangement.
Goods shipped as per contracted term.
Goods arrive at local port or warehouse, depending on contracted
term.
Support & re-ordering.
Any question about Printing Machinery Parts ,contact with us
please,sincere service for you and welcome to Micro Control!
