Auto Tension Controller feedback Two Reel Control With Tension
Loadcells ST-3600 magentic powder controller
ST-3600 Auto tension controller
Feedback Control Tension Controller Two Reel Control With Two 50kg
Tension Loadcells
Characters:
ST-3600 is a simple but powerful tension controller.The Guide of
its panel operations is as follows:
1. Button of output on/off switch : switch on the output for
outputs between terminals PA-PAN,SA-GND or PB-GND, SB-GND ; switch
off the output for "off" on LED display and controller provides no
output at all.
2. Manual/automatic mode switch button : change status between
manual and automatic by pressing the button.
3. Page turning button: turn page of LCD display screen.
| Parameters |
| Model | ST-3600 |
| Power Supply | AC 180~260V 50/60HZ |
| Input | Analog singal | 1. L+~L-;R+~R-;Left,right tension loadcell signal input
STS tension loadcell signal (0~200mv,power supply DC5V)
STSA tension loadcell signal(0~15mv;power supply DC5v) |
| Digital signal | 1. MC0:Main axle proximity switch speed signal ( proximity switch
PNP Type,voltage supply DC24V)
2. MC1,MC5,MC6:points control signal (24V+high electric control
signal) |
| Output | Main output | PA,PB:Two roads 24V/4A power output directly drive magnetic powder
clutch or brake |
| Auxiliary output | SA,SB:Two roads DC0~10V/0~5V output
can drive torque type inverter Synchronously,
SA and PA main axle output changes synchronously,SB and PB main
axle output changes synchronously. |
| Outline size | 246*154*114mm |
Terminal Connection:
1. Used one sets of output power of 24V/4A or two sets output power
of 24V/3A from PA-PAN or PB-PBN terminals to drive powder
brake/clutch.
2. Use two sets of analog output voltage of 0~10v from SA-AGND or
SB-AGND terminals to drive torque motor or torque mode converter.
3. Use one set of constant analog output voltage of 5V from 5V+~5V-
terminals to supply power to tension detectors installed at both
left and right sides.
4. Use one set of constant analog output voltage of 24V from
24V+~24V- terminals to supply power approch switch.
Tension loadcell models avaiable:
| Model | STS-010 | STS-030 | STS-050 | STS-100 | STS-200 | STS-500 |
| Power supply | DC5V |
| Rated Voltage | Small base: 10~100kg; Large base: 200kg~500kg |
| Working Principle | Differential type |
| Rated Output | 0~180mv |
| Bearing | P204 ball shape universal bearing P204 |
| Electrical Connection | +5v:Red GND:Black Signal(+):Yellow Signal(-):Green |
| Outsize | Small base:134*44*78mm Large base: 150*68*78mm |
Bearing
mm | Rated Stroke kg | Size mm |
| D | d1 | d2 | d3 | d4 | b1 | b2 | b3 | b4 | b5 | h | u1 |
| 25 | 12.5/20/37.5/75/150 | 52 | 70 | 31 | 125 | 95 | 48 | 15 | 12.2 | 4 | 19.6 | 157.5 | 6.6 |
FAQ
1. How can you contact us?
Pls contact us by email,Skype,Whatsapp.
2. How can you place the order from us?
You can let us know your detail request,we can design the best
solution for you;and if you have your detail engineer drawing,pls
don’t hesitate to send us.
3. What is the MOQ in our company?
As for most of products,we don’t have MOQ.
4. What is your delivery time of the products?
For air shaft and other customized products need time to
manufacture,the delivery time is about 7~15days;For Magnetic powder
brake/clutch,Air disc brake/clutch,tension control system…etc,we
have stock in factory,the delivery time is 3~5days.
5. What is your trade term?
Usually we accept trade by EXW,FOB,CIF…etc,you can choose the best
way you would like.
